Product Details:
Operating Pressure | 50 to 70 bar |
TFC Spiral Wound Membranes Diameter | 8 inch |
Housing Material | UPVC |
Power Supply | 380 V / 50Hz / 3 Phase |
Control Panel IP Rating | IP 56 |
Operation | Semi Automatic / Automatic |
Module Mounting | Vertical |
Nominal Membrane Pore Size | 0.1 to 0.001 micron |
Ultrafiltration is considered more effective as compared to traditional water filtration. It removes high molecular weight substances, colloidal materials, polymeric materials, organic and inorganic materials.
UF membranes used to remove high molecular-weight substances, colloidal materials, silt, turbidity, organic/inorganic polymeric molecules, algae, particulate matters, suspended solids and all microorganisms from Water & Wastewater. Ultrafiltration is a kind of membrane filtration which works through pressurized water flow. In this process, feed water is pumped to the modules with high pressure, depending upon the pore size of membranes contaminants are rejected.
Working Principle:Ultrafiltration is a unique pressure-driven physical separation process in which the water is passed through porous (partially permeable) membranes with pore sizes in the range of 0.1 to 0.001 micron. These membranes are in the form of long hollow fibers. The result is high pure water free from physical and biological contaminations. Ultrafiltration is not fundamentally different from microfiltration or nanofiltration, except in terms of the size of the molecules it retains. Ultrafiltration is utilized in two different operational modes such as Dead-End and Cross-Flow.
In Dead-End ultrafiltration process, without circulation overall quantity of feed water is pressed through the membrane module; whereas in Cross-Flow process, the feed water passes parallel to the membrane face, one part is passed through the membrane and another part is re-circulated to create turbulence over the membrane.
Features:- Low fouling Hydrophilic UF membrane
- Excellent filter performance with high flux
- The high removal efficiency of bacteria and viruses
- Periodically back washed and air scoured for consistent performance
- Simple, vertical, modular design allows low cost, compact systems
- Fully automated control system for the backwashing process
- Advanced custom designed Control Cubicle
- Stainless/carbon steel equipment frame
- Control panel with standard PLC and HMI interface mounted on equipment frame.
- All alarm and shut down conditions are indicated on the control interface
- Permeate, back pulse pumps, membrane aeration blowers and associated valving mounted on equipment frame
- AISI304 or AISI316 duplex stainless steel high-pressure pump
- ST37 epoxy painted carbon steel or AISI 304 stainless steel frame
- 5 micron cartridge filtration
- Low pressure line U-PVC PN16
- The high pressure line or Duplex Stainless Steel AISI 316t
- Check electric actuated butterfly valve
- Low and High pressure switch
- Clean and waste water flow meters
- Glycerine manometers
- Product water conductivity meter (0-2000μs/cm)
- Introduction and product water pH Meter (optional)
- On-Off switch
- Alarm and status lights